PRODUCTSALUMINUM
Valued for its low density and light weight, unalloyed and alloyed (by adding a strengthening element such as Cu or Mg) Aluminum is also held in high regard for its corrosion resistance. For more information – or to start your order – contact us today.
BAR
| Flat | Alloys: 2024, 6061, 6063, 7075 Type: Cold Finished, Extruded | Thicknesses: 0.1875" thru 4.5" Widths: up to 6" |
| Hexagon | Alloys: 2011, 2024, 6061, 6262 Type: Cold Finished, Extruded | Diameter: 0.375" thru 2.5" |
| Round | Alloys: 2011, 2024, 6061, 6063, 6262, 7075 Type: Cold Finished, Extruded | Diameter: 0.1875" thru 12.125" |
| Square | Alloys: 2024, 6061, 7075, 6063, 6262 Type: Cold Finished, Extruded | Sizes: 0.375" thru 6" |
PIPE
| Seamless | Alloys: 3003, 6061, 6063 Schedules: 40, 80 | OD: 0.75" thru 10" Stock Length: 20’ |
| Structural | Alloys: 6061, 6063 Schedules: 10, 40, 80 | OD: 0.375" thru 12" Stock Lengths: 10’, 20’ |
STRUCTURAL SHAPES
| Angle | Alloys: 6061, 6063 Types: American Standard, Sharp Corner | Sizes: 0.5" x 0.5" thru 8" x 8" Thicknesses: 0.0625" thru 0.375"Sizes: 0.5" x 0.5" thru 8" x 8" Thicknesses: 0.0625" thru 0.375" |
| Channel | Alloys: 6061, 6063 Types: Aluminum Association, American Standard, Sharp Corner | Depths: 0.5" thru 12" Flange Widths: 0.375" thru 5" |
| I-Beam | Alloys: 6061 Types: Aluminum Association, American Standard | Depths: 3" thru 12" Flange Widths: 2.33" thru 7" |
| Tee | Alloys: 6061, 6063 Types: American Standard, Sharp Corner | Depths: 0.75" thru 2" Flange Widths: 0.75" thru 2 |
TUBE
| Rectangle | Alloys: 6061, 6063 Type: Extruded | Widths 0.5" thru 8" Wall Thickness: 0.095" thru 0.25" |
| Round | Alloys: 3003, 5052, 6061, 6061 Holobar, 6063 Type: Coiled, Extruded, Extruded Seamless, Seamless Drawn | OD: 0.1875" thru 16" Wall Thickness: 0.025" thru 1" |
| Square | Alloys: 6061, 6063 Type: Extruded | Widths 0.75" thru 6" Wall Thickness: 0.062" thru 0.25" |
PLATE
| Cast Plate | Alloys: MIC-6 | Thicknesses: 0.25" thru 2.5" Widths: 48", 60" |
| Non-Heat Treatable (Common Alloys) | Alloys: 3003, 5052, 5083, 5086, 5454 | Thicknesses: 0.25" thru 0.875" Widths: 48", 60", 72", 84", 96" |
| Heat Treatable | Alloys: 2024, 6061, 7075 | Thicknesses: 0.25" thru 8" Widths: 36", 48", 60", 72", 84" |
SHEET
| Non-Heat Treatable (Common Alloys) | Alloys: 1100, 3003, 3105, 5005, 5052, 5083, 5086 Type: Bare, Embossed, Mill Finish, Painted | Thicknesses: 0.02" thru 0.25" Widths: 36", 48", 60", 72", 84 |
| Heat Treatable | Alloys: 2024, 6061 Type: Bare, Mill Finish | Thicknesses: 0.02" thru 0.19" Widths: 36", 48", 60" |