Have a question? contact us today!

ALUMINUM

Valued for its low density and light weight, unalloyed and alloyed (by adding a strengthening element such as Cu or Mg) Aluminum is also held in high regard for its corrosion resistance. For more information – or to start your order – contact us today.

BAR

FlatAlloys: 2024, 6061, 6063, 7075 Type: Cold Finished, ExtrudedThicknesses: 0.1875" thru 4.5" Widths: up to 6"
HexagonAlloys: 2011, 2024, 6061, 6262 Type: Cold Finished, ExtrudedDiameter: 0.375" thru 2.5"
RoundAlloys: 2011, 2024, 6061, 6063, 6262, 7075 Type: Cold Finished, ExtrudedDiameter: 0.1875" thru 12.125"
SquareAlloys: 2024, 6061, 7075, 6063, 6262 Type: Cold Finished, ExtrudedSizes: 0.375" thru 6"

PIPE

SeamlessAlloys: 3003, 6061, 6063 Schedules: 40, 80OD: 0.75" thru 10" Stock Length: 20’
StructuralAlloys: 6061, 6063 Schedules: 10, 40, 80OD: 0.375" thru 12" Stock Lengths: 10’, 20’​​​​​​​​​​​​​​​​​​

STRUCTURAL SHAPES

AngleAlloys: 6061, 6063 Types: American Standard, Sharp CornerSizes: 0.5" x 0.5" thru 8" x 8" Thicknesses: 0.0625" thru 0.375"Sizes: 0.5" x 0.5" thru 8" x 8" Thicknesses: 0.0625" thru 0.375"
ChannelAlloys: 6061, 6063 Types: Aluminum Association, American Standard, Sharp CornerDepths: 0.5" thru 12" Flange Widths: 0.375" thru 5"
I-BeamAlloys: 6061 Types: Aluminum Association, American StandardDepths: 3" thru 12" Flange Widths: 2.33" thru 7"
TeeAlloys: 6061, 6063 Types: American Standard, Sharp CornerDepths: 0.75" thru 2" Flange Widths: 0.75" thru 2

TUBE

RectangleAlloys: 6061, 6063 Type: ExtrudedWidths 0.5" thru 8" Wall Thickness: 0.095" thru 0.25"
RoundAlloys: 3003, 5052, 6061, 6061 Holobar, 6063 Type: Coiled, Extruded, Extruded Seamless, Seamless DrawnOD: 0.1875" thru 16" Wall Thickness: 0.025" thru 1"
SquareAlloys: 6061, 6063 Type: ExtrudedWidths 0.75" thru 6" Wall Thickness: 0.062" thru 0.25"​​​​​​​​​​​​​​​​​​

PLATE

Cast PlateAlloys: MIC-6Thicknesses: 0.25" thru 2.5" Widths: 48", 60"
Non-Heat Treatable (Common Alloys)Alloys: 3003, 5052, 5083, 5086, 5454Thicknesses: 0.25" thru 0.875" Widths: 48", 60", 72", 84", 96"
Heat TreatableAlloys: 2024, 6061, 7075Thicknesses: 0.25" thru 8" Widths: 36", 48", 60", 72", 84"

SHEET

Non-Heat Treatable (Common Alloys)Alloys: 1100, 3003, 3105, 5005, 5052, 5083, 5086 Type: Bare, Embossed, Mill Finish, PaintedThicknesses: 0.02" thru 0.25" Widths: 36", 48", 60", 72", 84
Heat TreatableAlloys: 2024, 6061 Type: Bare, Mill FinishThicknesses: 0.02" thru 0.19" Widths: 36", 48", 60"